Solution Description

Solution Description    

Software

Hanfa team via the ongoing pursuit of technological innovation, to satisfy the requirements of market development, in the unique cell screw air compressor sequence is developed on the basis of scaled-down size, the structure more realistic, more value-powerful new cellular screw series. Extensive efficiency is good, the a lot more productive is commonly utilized in drilling, pipeline strain test and related fields.For cold location can also be optional liquid gas oil heater, by means of the pulmonary circulation cooling heating cylinder diesel motor, thus permitting you to commence.

Characteristics

one.Large dependability

All the major elements and elements are manufactured by nicely-recognized enterprises at house and abroad with trustworthy top quality. Stress, pressure continuous, stream secure Recognize the displacement from 0 to one hundred% T continued from part II, substantial efficiency, power saving, steady and reputable

two.Ease

Tiny quantity, light weight, minimal noiseCompact, straightforward to transport, covers an area of considerably less, also can enter in slim situation, out freely, reduce transportation costs.All the doorway layout, make sure the wide procedure place, practical upkeep and restore. To preserve time, improve effectiveness.

three.To adapt to the surroundings

This air compressor to make certain that the cold temperature, oxygen issue can also be a perfect begin, satisfy the bearing and all varieties of bad working situation of using the atmosphere. For customers to remedy the has the be concerned, significantly enhance the function performance.

four.Thorough monitoring

Tools managing point out can be thorough monitoringControl panel, in each Chinese and English interface is concise, very clear, equipment managing position be obvious at a glance, the procedure is hassle-free, and geared up with automatic stop function with regard to the promise the protection of man or woman, device.
Complex Knowledge

Functioning Site

Organization Introduction
Hanfa Group proven in 1998 is a key company in the industry of geological exploration and h2o well subject, with the ability to research,manufacture and marketplace. Now, the Team pursues higher standard production and qualified products. It has more than 20 species these kinds of as drinking water properly drilling rig, main drilling rig, engineering drilling rig, DTH drilling rig, horizontaldirectional drilling rig, etc. These machines are mostly employed in geological prospecting, exploration of railway and freeway engineering, mining, SPT, drinking water nicely, geothermal effectively etc. Some of them received the Scientific and Technical Progress Prize or the Nationwide Scientific Investigation Accomplishment Prize. All the products have passed the quality program certification of ISO9001:2000 and are national inspection-free of charge items.

one. More than thirty several years of experience 
The manufacturing unit is found in ZheJiang Province, China. We are quite welcome to check out our manufacturing unit. If
you want it, we will set up a choose-up.
2.Top manufacturing team 
The transportation and packaging will be packaged in intercontinental specifications. If you have special packaging needs, we will give you the most appropriate answer.
3.Our Service 
– New device provides technological trair.
– When anything at all goes mistaken with the equipment by normal using, our complex particular person have to look at the very first time no matter exactly where you are.
– When the device need to be managed, you will receive the reminding from us.
– According to diverse geological situations, we will advocate diverse development plans for you
– Remind you which are putting on areas, so you can get ready sufficient.
– 24 hours respond to your good quality dilemma.

FAQ
1,Are you investing firm or maker?

We are specialist company, and our factory largely generate h2o effectively drilling rig, main drilling rig, DTH drilling rig, piling rig, etc. Our goods have been exported to far more than fifty nations of Asia, South The united states, Africa, and get a good status in the globe.

two,Are your merchandise certified?
Sure, our goods all have obtained ISO certificate,and we have specialized high quality inspection office for checking every single device just before leaving our factory.

3,How about your device high quality? 
All of our devices maintain the ISO, QC and TUV certification, and each and every set of device need to move a great number of stringent tests in purchase to offer the best quality to our buyers.

4,Do you have following services?
Yes, we have unique provider staff which will supply you skilled assistance. If you require, we can send out our engineer to your worksite and provid the training for your workers.

five,What about the qaulity warranty? 
We supply one-yr top quality guarantee for machines’ principal body.

6,How long can you produce the equipment? 
Normally, we can provide the device in 7 days.

Our Customers

###

###

###

###

###

###

###

###

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

editor by czh 2022-12-20