Product Description
Product Description
Medium voltage permanent magnet variable frequency screw compressor
| HY(V)-Z | Working pressure | Capacity | Power | Noise | Air outlet | Net weight | |||
| bar | psig | (m3/min) | cfm | kW | hp | dB | Pipe diameter | ||
| HYV-55Z | 20 | 291 | 3.8-6.4 | 134-226 | 55 | 75 | 67±3 | DN32 | 2200 |
| 25 | 364 | 3.6-6.0 | 127-212 | 55 | 75 | 67±3 | DN32 | 2200 | |
| 30 | 437 | 3.1-5.2 | 109-184 | 55 | 75 | 67±3 | DN32 | 2200 | |
| 35 | 510 | 2.6-4.3 | 92-152 | 55 | 75 | 67±3 | DN32 | 2200 | |
| 40 | 583 | 2.3-3.8 | 81-134 | 55 | 75 | 67±3 | DN32 | 2200 | |
| HYV-75Z | 20 | 291 | 4.6-7.7 | 162-272 | 75 | 100 | 68±3 | DN32 | 2400 |
| 25 | 364 | 4.5-7.5 | 159-265 | 75 | 100 | 68±3 | DN32 | 2400 | |
| 30 | 437 | 4.0-6.7 | 141-237 | 75 | 100 | 68±3 | DN32 | 2400 | |
| 35 | 510 | 3.8-6.3 | 134-222 | 75 | 100 | 68±3 | DN32 | 2400 | |
| 40 | 583 | 3.0-5.0 | 106-177 | 75 | 100 | 68±3 | DN32 | 2400 | |
| HY-90Z | 20 | 291 | 6.7-11.2 | 237-396 | 90 | 120 | 70±3 | DN32 | 2800 |
| 25 | 364 | 6.2-10.3 | 219-364 | 90 | 120 | 70±3 | DN32 | 2800 | |
| 30 | 437 | 6.0-10.0 | 212-353 | 90 | 120 | 70±3 | DN32 | 2800 | |
| 35 | 510 | 4.1-6.8 | 145-240 | 90 | 120 | 70±3 | DN32 | 2800 | |
| 40 | 583 | 3.8-6.3 | 134-222 | 90 | 120 | 70±3 | DN32 | 2800 | |
| HYV-110Z | 20 | 291 | 8.2-13.6 | 290-480 | 110 | 150 | 72±3 | DN40 | 3100 |
| 25 | 364 | 7.5-12.5 | 265-441 | 110 | 150 | 72±3 | DN40 | 3100 | |
| 30 | 437 | 6.5-10.8 | 230-381 | 110 | 150 | 72±3 | DN40 | 3100 | |
| 35 | 510 | 5.8-9.6 | 205-339 | 110 | 150 | 72±3 | DN40 | 3100 | |
| 40 | 583 | 5.5-9.1 | 194-321 | 110 | 150 | 72±3 | DN40 | 3100 | |
| HYV-132Z | 20 | 291 | 10.1-16.8 | 357-593 | 132 | 175 | 74±3 | DN40 | 3300 |
| 25 | 364 | 9.0-15.0 | 318-530 | 132 | 175 | 74±3 | DN40 | 3300 | |
| 30 | 437 | 7.9-13.1 | 279-463 | 132 | 175 | 74±3 | DN40 | 3300 | |
| 35 | 510 | 7.1-11.8 | 251-417 | 132 | 175 | 74±3 | DN40 | 3300 | |
| 40 | 583 | 6.8-11.3 | 240-399 | 132 | 175 | 74±3 | DN40 | 3300 | |
| HYV-160Z | 20 | 291 | 9.6-16.0 | 339-565 | 160 | 215 | 75±3 | DN50 | 3800 |
| 25 | 364 | 10.0-16.6 | 353-586 | 160 | 215 | 75±3 | DN50 | 3800 | |
| 30 | 437 | 9.8-16.3 | 346-576 | 160 | 215 | 75±3 | DN40 | 3700 | |
| 35 | 510 | 9.4-15.6 | 332-551 | 160 | 215 | 75±3 | DN50 | 3800 | |
| 40 | 583 | 8.3-13.8 | 293-487 | 160 | 215 | 75±3 | DN40 | 3700 | |
| HYV-185Z | 20 | 291 | 14.1-23.5 | 498-830 | 185 | 250 | 76±3 | DN50 | 4000 |
| 25 | 364 | 11.7-19.5 | 413-689 | 185 | 250 | 76±3 | DN50 | 4000 | |
| HYV-200Z | 20 | 291 | 15.6-26.0 | 551-918 | 200 | 270 | 76±3 | DN50 | 4200 |
| 25 | 364 | 13.7-22.9 | 484-809 | 200 | 270 | 76±3 | DN50 | 4200 | |
| 30 | 437 | 13.3-22.2 | 470-784 | 200 | 270 | 76±3 | DN50 | 4200 | |
| HYV-220ZW | 20 | 291 | 17.8-29.7 | 629-1049 | 220 | 300 | 78±3 | DN65 | 5000 |
| 25 | 364 | 15.5-25.8 | 547-911 | 220 | 300 | 78±3 | DN65 | 5000 | |
| 30 | 437 | 13.9-23.2 | 491-819 | 220 | 300 | 78±3 | DN65 | 5000 | |
| 35 | 510 | 13.2-22.0 | 565-777 | 220 | 300 | 78±3 | DN65 | 5000 | |
| 40 | 583 | 12.2-20.3 | 431-717 | 220 | 300 | 78±3 | DN65 | 5000 | |
| HYV-250ZW | 20 | 291 | 20.5-34.2 | 724-1208 | 250 | 350 | 78±3 | DN65 | 5700 |
| 25 | 364 | 17.5-29.1 | 618-1571 | 250 | 350 | 78±3 | DN65 | 5700 | |
| 30 | 437 | 16.5-27.5 | 583-971 | 250 | 350 | 78±3 | DN65 | 5700 | |
| 35 | 510 | 15.1-25.2 | 533-890 | 250 | 350 | 78±3 | DN65 | 5700 | |
| 40 | 583 | 13.7-22.8 | 484-805 | 250 | 350 | 78±3 | DN65 | 5700 | |
| HYV-280ZW | 20 | 291 | 22.6-37.7 | 798-1331 | 280 | 375 | 80±3 | DN65 | 6000 |
| 25 | 364 | 20.4-34.0 | 720-1201 | 280 | 375 | 80±3 | DN65 | 6000 | |
| 30 | 437 | 18.0-30.0 | 636-1059 | 280 | 375 | 80±3 | DN65 | 6000 | |
| 35 | 510 | 16.4-27.3 | 579-964 | 280 | 375 | 80±3 | DN65 | 6000 | |
| 40 | 583 | 15.0-25.0 | 530-883 | 280 | 375 | 80±3 | DN65 | 6500 | |
Picture Display
The advantage of screw air compressor
Company strength display
HangZhou CHINAMFG Gas Equipment Co., Ltd. is a manufacturer engaged in the research and development, design and production of gas compressors. The company has its own production technology, processing equipment and assembly technology, and has many years of experience in the production of various flammable and explosive special gas compressors.
Huayan compressor products cover almost all gas media, up to 6th-stage compression and 3000kw power. Products can be customized according to customer requirements to better meet customer needs. The products are mainly used in gas compressors in the petroleum industry, chemical and natural gas compressors, industrial compressors, compressors for waste gas treatment and biogas utilization, and compressors for special gases.
After Sales Service
1.Quick response within 2 to 8 hours, with a reaction rate exceeding 98%;
2. 24-hour telephone service, please feel free to contact us;
3. The whole machine is guaranteed for 1 year (excluding pipelines and human factors);
4. Provide consulting service for the service life of the whole machine, and provide 24-hour technical support via email;
5. On-site installation and commissioning by our experienced technicians;
Exhibition Display
Certificate display
Packaging and Shipping
FAQ
Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
| After-sales Service: | Provide After-Sell Sevice |
|---|---|
| Warranty: | 18monthes |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Customization: |
Available
|
|
|---|
.webp)
How does variable speed drive technology improve air compressor efficiency?
Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:
1. Matching Air Demand:
Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.
2. Reduced Unloaded Running Time:
Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.
3. Soft Starting:
Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.
4. Energy Savings at Partial Load:
In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.
5. Elimination of On/Off Cycling:
Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.
6. Enhanced System Control:
VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.
By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.
.webp)
How are air compressors employed in the mining industry?
Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:
1. Exploration and Drilling:
Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.
2. Ventilation and Air Quality Control:
Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.
3. Material Conveyance:
In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.
4. Dust Suppression:
Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.
5. Instrumentation and Control:
Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.
6. Explosive Applications:
In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.
7. Maintenance and Repair:
Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.
It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.
By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.
.webp)
Are there air compressors specifically designed for high-pressure applications?
Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:
1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.
2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.
3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.
4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:
- Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
- Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
- Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
- Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
- Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.
5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.
When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.
High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.
editor by CX 2023-10-10
China high quality 20HP 30HP 16bar Portable High Pressure Pm VSD VFD Direct Driven Small Size Spanish Controller Commercial Rotary Screw Silent Air Compressor for Laser Cutting arb air compressor
Product Description
Product Description
product introduction
Model:OPL-20PV/16
Power:15kw
Horsepower:20hp
Specification:1750*720*1490mm
Weight:330kg
Air tank:340L*1
System language:Can be customized
Detailed Photos
High reliability
High reliability, few parts and nowearing parts, so it runs reliably andhas a long service life. Generally, thedesign life of the main screw machiHangZhouad is 15-20 years.
High reliability
High reliability, few parts and nowearing parts, so it runs reliably andhas a long service life. Generally, thedesign life of the main screw machiHangZhouad is 15-20 years.
Product Parameters
| 4 in 1 High Pressure Series(Portable) | |||||
| Model | OPL-20PV/16 | OPL-30PV/16 | OPL-20PV/16(2) | OPL-30PV/16(2) | |
| Power (kw) | 15 | 22 | 15 | 22 | |
| Horsepower (hp) | 20 | 30 | 20 | 30 | |
| Air displacement/ Working pressure (M³/Min. / bar) |
1.2 / 16 | 2.0/ 16 | 1.2 / 16 | 2.0 / 16 | |
| Air out let diameter |
DN25 | DN25 | DN25 | DN25 | |
| Lubricating oil volume (L) | 18 | 18 | 18 | 18 | |
| Noise level dB(A) | 62±2 | 68±2 | 62±2 | 68±2 | |
| Air Tank(L) | 340*1 | 340*1 | 160*2 | 230*2 | |
| Driven method | Direct driven | ||||
| Type | Variable frequency starts | ||||
| Length (mm) | 1750 | 1750 | 1750 | 1750 | |
| Width (mm) | 720 | 720 | 720 | 850 | |
| Height (mm) | 1490 | 1490 | 1490 | 1530 | |
| Weight (kg) | 330 | 330 | 370 | 390 | |
Certifications
OPPAIR’s quality meets EU standards and has CE quality inspection certificate.
The testing agency is a recognized certification agency in Italy. After certification at our factory site, strict machine testing and CE certificate are issued. Authority, more trustworthy.
The following picture is the certification certificate issued by SGS company after the on-site certification of our company. Field Certification CHINAMFG is a trusted manufacturer.
Packaging & Shipping
Our company cleans the inside and outside of the product before delivery, and then covers it with multi-layer industrial stretch film, bubble film, anti-collision column, and finally loads it with wooden pallets or wooden boxes.
Company Profile
ZheJiang CHINAMFG Machinery Manufacturing Co.,Ld base in HangZhou ZheJiang , anAAA-level enterprise with high-quality service and integrity in China.
OPPAIR as 1 of the world’s largest air compressor system suppliers, currently developing the following products: Fixed-speed Air Compressors, Permanent Magnet VariableFrequency Air Compressors, Permanent Magnet Variable Frequency Two-stage Air Compressors, 4-IN-1 Air Compressors (lntegrated Air Compressor for Laser Cutting Machine)Supercharger, CHINAMFG Air Dryer, Adsorption Dryer, Air Storage Tank and related accessories.
FAQ
Q1: Why do customers choose us?
A: ZheJiang CHINAMFG Machinery Manufacturing Co., Ltd. has a history of 16 years. We specialize in the production of screw air compressors. We warmly welcome your small trial orders for quality or market testing, and we offer special services.
Q2: Are you a manufacturer or a trading company?
A: We are a professional manufacturer with a large modern factory in HangZhou, China. OEM and ODM services can be accepted.
Q3: What is your delivery time?
A: 380V 50HZ We can ship within 10 days. It takes 20 days for other voltages, if you need to rush, please contact our sales staff in advance.
Q4: How long is the warranty period of your air compressor?
A: One year for the whole machine and 2 years for the screw host, excluding consumables.
Q5: How long can your air compressor last?
A: More than 10 years under normal use.
Q6: What are the payment terms?
A: T/T, L/C, Western Union, Credit Card, etc. We can also accept USD, RMB, EUR and other currencies.
Q7: Will you provide some spare parts for the machine?
A: Yes, of course.
Q8: Can you accept OEM orders?
A: Yes, with a professional design team, OEM orders are very welcome.
Q9: What kind of trade terms can you accept?
A: Available trade terms: FOB, CIF, EXW, etc.
Q10: How about the product packaging?
A: We strictly pack our products in standard airworthy boxes.
| After-sales Service: | 1year |
|---|---|
| Warranty: | 1year |
| Lubrication Style: | Oil-less |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Angular |
| Samples: |
US$ 2880/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
Can air compressors be used for cleaning and blowing dust?
Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes:
1. Cleaning Machinery and Equipment:
Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness.
2. Dusting Surfaces:
Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging.
3. Cleaning HVAC Systems:
Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality.
4. Blowing Dust in Workshops:
In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes.
5. Cleaning Electronics and Computer Equipment:
Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices.
6. Industrial Cleaning Applications:
Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently.
When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force.
Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.
How are air compressors employed in the mining industry?
Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:
1. Exploration and Drilling:
Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.
2. Ventilation and Air Quality Control:
Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.
3. Material Conveyance:
In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.
4. Dust Suppression:
Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.
5. Instrumentation and Control:
Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.
6. Explosive Applications:
In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.
7. Maintenance and Repair:
Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.
It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.
By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.
Are there air compressors specifically designed for high-pressure applications?
Yes, there are air compressors specifically designed for high-pressure applications. These compressors are engineered to generate and deliver compressed air at significantly higher pressures than standard air compressors. Here are some key points about high-pressure air compressors:
1. Pressure Range: High-pressure air compressors are capable of producing compressed air at pressures typically ranging from 1000 to 5000 psi (pounds per square inch) or even higher. This is considerably higher than the typical range of 100 to 175 psi for standard air compressors.
2. Construction: High-pressure aircompressors feature robust construction and specialized components to withstand the higher pressures involved. They are designed with reinforced cylinders, pistons, valves, and seals that can handle the increased stress and prevent leaks or failures under high-pressure conditions.
3. Power: Generating high-pressure compressed air requires more power than standard compressors. High-pressure air compressors often have larger motors or engines to provide the necessary power to achieve the desired pressure levels.
4. Applications: High-pressure air compressors are utilized in various industries and applications where compressed air at elevated pressures is required. Some common applications include:
- Industrial manufacturing processes that involve high-pressure air for operations such as air tools, pneumatic machinery, and equipment.
- Gas and oil exploration and production, where high-pressure air is used for well drilling, well stimulation, and enhanced oil recovery techniques.
- Scuba diving and underwater operations, where high-pressure air is used for breathing apparatus and underwater tools.
- Aerospace and aviation industries, where high-pressure air is used for aircraft systems, testing, and pressurization.
- Fire services and firefighting, where high-pressure air compressors are used to fill breathing air tanks for firefighters.
5. Safety Considerations: Working with high-pressure air requires adherence to strict safety protocols. Proper training, equipment, and maintenance are crucial to ensure the safe operation of high-pressure air compressors. It is important to follow manufacturer guidelines and industry standards for high-pressure applications.
When selecting a high-pressure air compressor, consider factors such as the desired pressure range, required flow rate, power source availability, and the specific application requirements. Consult with experts or manufacturers specializing in high-pressure compressed air systems to identify the most suitable compressor for your needs.
High-pressure air compressors offer the capability to meet the demands of specialized applications that require compressed air at elevated pressures. Their robust design and ability to deliver high-pressure air make them essential tools in various industries and sectors.
editor by CX 2023-10-01
China 11kW 15HP 16 Bar High Pressure Electric Rotary Screw Air-Compressors Machine with 500L Air Tank air compressor harbor freight
Applicable Industries: Hotels, Garment Retailers, Creating Materials Retailers, Manufacturing Plant, Machinery Repair Retailers, Meals & Beverage Manufacturing facility, Farms, Restaurant, Property Use, Retail, Foods Shop, Printing Outlets, Development works , Strength & Mining, Meals & Beverage Shops, Other, Spare Components Sprocket for CZPT Mix Harvester DC105 product Advertising and marketing Business, Basic industry
Showroom Place: Canada, United States, Peru, Indonesia, India, Mexico, Russia, Spain, Thailand, Chile, Sri Lanka, South Africa, Malaysia, Australia
Situation: New
Type: Screw
Configuration: Stationary
Power Resource: AC Electrical power
Lubrication Design: OIL-Considerably less
Mute: Of course
Design Quantity: DBZY-15A
Voltage: 220V/230V/380V/400V/415V/440V/460V/600V/Customized
Dimension(L*W*H): 1882*790*1731 mm
Weight: 560kg
Guarantee: 1 Year
Functioning Strain: 7 bar, 8 bar, New Car Parts Camshaft Adjuster Variable Valve Timing (VVT) Sprocket L3K9-twelve-4X0B For MAZDA 13 bar, ten bar, 16bar
Machinery Examination Report: Presented
Online video outgoing-inspection: Provided
Advertising and marketing Type: New Item 2571
Guarantee of main factors: 2 many years
Core Elements: PLC, Engine, Motor, Bearing
Gas Variety: Air
Totally free air supply: 1.05m3/min 37.06CFM
Force: 7~16bar
Manufacturer of screw air end: Hanbell/GHH/Baosi
Electrical motor: Siemens/ABB/WEG IP54 protection amount
Motor Vitality Effectiveness: IE2, IE3 for optional
Beginning mothod: Frequency conversion begin
Cooling: Air cooling
Discharge temperature: Considerably less than ambient +8 ℃
Insulation quality: F
OEM: Provided
Packaging Particulars: wooden case
Port: ZheJiang
11kW 15HP sixteen Bar Higher Pressure Electric powered Rotary Screw Air-Compressors Equipment with 500L Air Tank 11kW 15HP 16 Bar Higher Force Electric Rotary Screw Air-Compressors Device with 500L Air TankModel:DBZY-15ACapacity: 1.05m3/minWorking stress: sixteen barHead: CZPT AB+Transmission method: belt driveCooling technique: air coolingMotor: 380v/50hz/3phase, IP54Exhaust temperature: ambient temperature +8℃Noise: ≤ sixty five dB(A)Outlet measurement: G3/4”Gas tank: 500LCold dryer voltage: 220v/50/1phaseAir dryer: 16bar/1.2m3/2-10℃Filter: 16bar/1.5m3/4 pcs, particle content≤0.01μm，oil content≤0.003PPMDimensions: 1882*790*1731mmWeight: 560kg Technical Parameters
| Model | Capacity (m3/min) | Pressure(Bar ) | Power(kw) | Noise(DB) | Outlet diameter | Dimension(mm) | Weight(kg) | Air tank(L) | Exhaust oil content(ppm) |
| DBZY-10A | 0.fifty five | 1.fifty eight | 7.five | 65 | G3/four | 1418*700*1500 | 395 | 260 | 0.01 |
| DBZY-15A | 1.05 | 1.fifty eight | 11 | 65 | G3/four | 1882*790*1731 | 560 | 500 | 0.01 |
| DBZY-20A | 1.fifty one | 1.58 | 15 | 65 | G3/four | 1882*790*1731 | 572 | 500 | 0.01 |
| DMZY-15A | 1.05 | 1.58 | 11 | 65 | G3/four | 1882*790*1731 | 560 | 500 | 0.01 |
| DMZY-20A | 1.fifty two | 1.58 | 15 | 65 | G3/four | 1882*790*1731 | 572 | 500 | 0.01 |
| DMZY-30A | 2.41 | 1.fifty eight | 22 | 68 | G3/4 | 1882*1081*1801 | 630 | 500 | 0.01 |
| DCZY-30A | 2.21 | 1.58 | 22 | 68 | G3/4 | 1882*1081*1801 | 630 | 500 | 0.01 |
what to see in an air compressor
If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.
Pump
If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying one from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
safety equipment
There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these two safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.
CFM Rating
An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in one square inch of air. These two indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
Lack of oil and lubrication
Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
noise level
If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
editor by Cx 2023-07-04
China wholesaler 5.5-160kw Rotary AC Power Electric Air Cooled Frequency Inverter Single-Stage Fixed-Speed Belt Driven Screw Air Compressors portable air compressor
Product Description
| NO | Power (kW) |
Pressure (MPa) |
Volumetric flow (m³/min) |
Exhaust outlet size GBT7306(m)GBT9119(flange) |
Weight (kg) |
Size (L x W x H mm) |
| UD75-7C | 75 | 0.7 | 11.8 | DN50 | 1870 | 2100x1350x1550(A) |
| UD75-8C | 0.8 | 11.6 | ||||
| UD75-10C | 1 | 11.4 | ||||
| UD90-7D | 90 | 0.7 | 16.7 | DN50 | 2140 | 2200x1300x1750(A) 2200x1300x1750(W) |
| UD90-8D | 0.8 | 16.0 | ||||
| UD90-10D | 1 | 14.8 | ||||
| UD110-7 | 110 | 0.7 | 20.8 | DN80 | 3300 | 3050x1850x2120(A) 2850x1850x2120(W) |
| UD110-8 | 0.8 | 20.0 | ||||
| UD110-10 | 1 | 17.5 | ||||
| UD132-7 | 132 | 0.7 | 24.0 | DN80 | 3400 | 3050x1850x2120(A) 2850x1850x2120(W) |
| UD132-8 | 0.8 | 23.0 | ||||
| UD132-10 | 1 | 20.6 | ||||
| UD160-7 | 160 | 0.7 | 28.0 | DN80 | 3750 | 3050x1850x2120(A) 2850x1850x2120(W) |
| UD160-8 | 0.8 | 27.0 | ||||
| UD160-10 | 1 | 25.0 | ||||
| UD185-7 | 185 | 0.7 | 30.5 | DN80 | 3790 | 3050x1850x2120(A) 2850x1850x2120(W) |
| UD185-8 | 0.8 | 29.5 | ||||
| UD185-10 | 1 | 27.0 | ||||
| UD200-7 | 200 | 0.7 | 40.0 | DN100 | 4900 4600 |
3600x1850x2150(A) 3050x1850x2150(W) |
| UD200-8 | 0.8 | 39.0 | ||||
| UD200-10 | 1 | 35.0 | ||||
| UD250-7 | 250 | 0.7 | 47.5 | DN125 | 6600 6200 |
4200x2150x2250(A) 3400x2150x2250(W) |
| UD250-8 | 0.8 | 46.7 | ||||
| UD250-10 | 1 | 42.0 | ||||
| UD280-7 | 280 | 0.7 | 53.0 | DN125 | 7150 6800 |
4200x2150x2250(A) 3400x2150x2250(W) |
| UD280-8 | 0.8 | 52.0 | ||||
| UD280-10 | 1 | 46.7 | ||||
| UD315-7 | 315 | 0.7 | 59.7 | DN125 | 8400 7600 |
5000x2150x2300(A) 3850x2150x2250(W) |
| UD315-8 | 0.8 | 56.7 | ||||
| UD315-10 | 1 | 50.2 | ||||
| UD355-7 | 355 | 0.7 | 70.3 | DN125 | 8600 7800 |
5000x2150x2300(A) 3850x2150x2250(W) |
| UD355-8 | 0.8 | 65.5 | ||||
| UD355-10 | 1 | 55.2 | ||||
| UD400-8 | 400 | 0.8 | 72.3 | DN125 | 8800 8000 |
5000x2150x2300(A) 3850x2150x2250(W) |
| UD400-10 | 1 | 62.8 |
FAQ
Q: How about our after-sales service?
A: Emails or calls for feedbacks in 2 months interval.
Q:What trade terms do we provide?
A: Trade term :CIF ,CFR ,FOB,Ex-Works .
Q: What kind of settlement currency do we offer?
A: We do any kind of currency such as US dollar, euro, RMB, etc.
Q: How long is the delivery time of our product?
A: Our standard delivery time is 30 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.
Q: How to install our compressor?
A: Installation guidance and on-site commissioning provided by trained technicians or local authorised service crew.
Q: What’s the Min. Order requirement ?
A: Our Min. Order quantity is 1pc.
| After-sales Service: | Standard Warranty |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | None |
| Customization: |
Available
|
|
|---|
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
editor by CX 2023-05-24
China Best Sales Rotary Screw Air Compressor with High Efficiency Technology Saving Power manufacturer
Product Description
Product Display
Technical parameter
| Product Model | JN75-18/6-II |
| Exhaust pressure (Mpa) | 0.6 |
| Exhaust volume(m3/min) | 18 |
| Engine power(kw) | 75 |
| Weight(kg) | 3400 |
| Overall dimension(mm) | 2860×1780×2571 |
| Exhaust interface | DN65 |
Our Main Products
Company Profile
HangZhou CZPT Mechinery Co., Ltd., incorporated with the authorization of ZHangZhoug CZPT Compressor Co., Ltd., is mainly engaged in mining machinery and equipment such as CZPT air compressor, down the hole drill truck, rock drill, etc. It is a foreign trade and domestic sales enterprise focusing on overseas markets, and is dedicated to professional and high-quality suppliers of mining machinery such as air compressor, down the hole drill, water well drill, rock drill, impactor, drill bit, etc. CZPT Group mainly produces air compressors, road machinery, water well equipment, rock drilling machinery, etc. Rock drilling machinery includes down the hole drill truck, rock bolt drill, cutting drill truck, rock drill, etc. Water well equipment includes water well drill and other products, road machinery includes slag raking machine, air pick and other products, and air compressor includes screw air compressor, piston air compressor, centrifugal air compressor and other products.
Among the member companies of CZPT Group, there are 63 wholly-owned or holding companies, including ZHangZhoug CZPT Compressor Co., Ltd., ZHangZhoug CZPT Heavy Industry Co., Ltd., ZheJiang CZPT Investment Co., Ltd., Jersey North America Research and Development Center Co., Ltd., Australia SCCA, and Austria LMF. The Group owns 8 key high-tech enterprises and 1 key high-tech enterprise under the National CZPT Plan. Participate in the national “the Belt and Road” strategic construction in accordance with the mode of “North American R&D, Made in China”. Traditional compressor products have entered the global market and have the ability to participate in international competition; The “one well, 1 station” geothermal power generation equipment with independent intellectual property rights has been successfully applied in many countries and regions. Adhering to the core value of “having continuous first-class innovation ability, creating value for users, and building the future”, CZPT takes “making contributions to saving the earth’s resources” as its core mission, and actively creates a new CZPT that is moving towards the blue CZPT and the world, transforming itself into a “manufacturer of complete sets of equipment for new energy power plants” and a “new power operator”, and becoming a global company.
Packaging & Shipping
Certifications
FAQ
Q1. Are you the manufacturer or trading company?
We are the manufacturer.
Q2. Where is your factory?
Our factory is locted in HangZhou city, ZHangZhoug province, China.
Q3. What’s the trade terms?
EXW; CIF; FOB are all acceptable.
Q4. What’s the payment terms?
T/T; L/C and so on.
Q5. How can I know whether my goods have been shipped?
Detailed photos of every process will be send to you during the production.
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Installation Type: | Stationary Type |
| Exhaust Pressure: | 2.5-1.8 (MPa) |
| Customization: |
Available
|
|
|---|
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by CX 2023-05-23
China 100 psi 185 cfm high performance low operating cost portable rotary screw air compressor for Sullair 185 series lowes air compressor
Error:获取session失败，
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by CX 2023-04-27
China wholesaler Energy Saving 110kw/150HP Permanent Magnet Screw Air Compressor & Rotary Air Compressor at-150A-Zpm with high quality
Product Description
Product Description:
The screw air compressor is composed of a pair of parallel and intermeshing female and male screws. It is the most widely used rotary compressor.
There are 2 types of single-screw and twin-screw. Generally speaking, the CZPT refers to the twin-screw compressor. It was first proposed by the German H. Krigar in 1878. It was not until 1934 by A. Lysholm of the Royal Institute of Technology in Sweden that the technology was established, and it began to be applied in industry and achieved rapid development.
Product Photo:
Product Specification:
| Model | AT-75A-ZPM | AT-100A-ZPM | AT-120A-ZPM | AT-150A-ZPM | AT-175A-ZPM |
| Air Delivery (m3/min)/ Pressur(Mpa) | 10.0/0.7 | 13.4/0.7 | 16.2/0.7 | 21/0.7 | 24.5/0.7 |
| 9.6/0.8 | 12.6/0.8 | 15.0/0.8 | 19.8/0.8 | 23.2/0.8 | |
| 8.5/10 | 11.2/1.0 | 13.8/1.0 | 17.4/1.0 | 20.5/1.0 | |
| 7.6/12 | 10.0/1.2 | 12.3/1.2 | 14.8/1.2 | 17.4/1.2 | |
| Cooling Method | Air Cooling | ||||
| Lubrication Volume(L) | 65 | 90 | |||
| Driving Mode | Direct Driven | ||||
| Voltage | 220-440V;50/60Hz | ||||
| Power(KW/HP) | 55/75 | 75/100 | 90/120 | 110/150 | 132/175 |
| Start System | Variable Frequency Starting | ||||
| Size(cm) | 176*126*156 | 176*126*156 | 240*148*185 | ||
| Weight | 950 | 1050 | 1200 | 1800 | 2200 |
| Outlet size | 2″ | 2″ | 2&1/2″ | ||
Product Parameters:
Product Details:
New generation of high-efficient Airend
1.Advanced and energy saving spiral tooth-type technology.
2.New Type 5:6 asymmetrical rotator tooth type.
3.Power increased by more than 5%-10% in air dischage when compared to other ordinary machine.
High -efficient power system
1.PM motor adopts high-performance NdFeB, which will not lose magnetism under 200ºC and its service life reaches as long as 15 years.
2.Coaxial structure design,drive efficiency of bearingless structure is 100%.
3.No regular grease injection, no replacement of bearings on a regular basis.
4.The motor is small in size, low noise,low in vibratio and smooth in operation.
High-Performance Inverter
1.Equipped with high frequency reactor, reducing the frequency converter.
2.Reduces CZPT current when it is started, realizes stable starting.
3.Can be automatically adjust the speed of the Motor accoring to your actual requirement, Energy saving up to 35%.
High Efficient oil and gas speraration system
with the world famous brand apoda oil and gas sperarator, reduce the oil content of the compressor exhaust gas and the oil content of the unit power consumption is only 1-2PPM.
Intelligent control system
1.Multi-Language can be switched according to your requirement.
2.With protection functions up to 12 types, such as overload,short circuit,low temperature, over voltage and so on.
3.Simply and clear, easy to operate.
Product Installation Diagram:
Product Application:
Workshop Display:
Our Advantages:
Factory Overview:
Global Market:
FAQ:
1.Q:Can you provide the samples to us?
A: yes, we can provide the sample to you in free, but the cost of the freight on your account.
2. Q:Can you do the order according to the customer requirement?
A:Yes, we can do the order according to your sample or drawings, OEM/ODM service provided.
3. Q:What is your delivery time?
A:Normally, it’s 7 days if the goods are in stock. It will takes about 15-25days if the goods are not in stock, Mainly depends on the order quantity.
4.Q:What is your terms of payment?
A:Generally 30% value of goods as deposit, balance amount against the copy of the BL.
5. Q: How long is the warranty ?
A: 14 months since the container shipped except quick-wear parts.
| After-sales Service: | 14 Months |
|---|---|
| Warranty: | 14 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Samples: |
US$ 13000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by CX 2023-04-22
China Hot selling 75HP 55kw Two-Stage Low-Pressure Stationary Variable Frequency Rotary Screw Air Compressor mini air compressor
Product Description
| NO | Power (kW) |
Pressure (Mpa) |
Volumetric flow (m3/min) |
Exhaust outlet size GBT7306 (m) GBT9119(flange) |
Weight (kg) |
Size (L x W x H mm) |
| UDT55-7 | 55 | 0.7 | 12.00 | DN80 | 2520 | 2300x1290x1820(A) |
| UDT55-8 | 0.8 | 11.00 | ||||
| UDT75-7 | 75 | 0.7 | 15.20 | DN80 | 2530 | 2300x1290x1820(A) |
| UDT75-8 | 0.8 | 15.20 | ||||
| UDT75-10 | 1.0 | 13.30 | ||||
| UDT75-12.5 | 1.25 | 12.00 | ||||
| UDT90-7 | 90 | 0.7 | 20.50 | DN80 | 3640 3500 2530 |
2600x1700x2090(A) 2850x1850x2120(W) 2300x1290x1820(A) |
| UDT90-8 | 0.8 | 19.50 | ||||
| UDT90-10 | 1.0 | 15.20 | ||||
| UDT90-12.5 | 1.25 | 14.30 | ||||
| UDT110-7 | 110 | 0.7 | 24.50 | DN80 | 3640 3900 2680 |
2600x1700x2090(A) 2850x1850x2120(W) 2300x1290x1820(A) |
| UDT110-8 | 0.8 | 23.40 | ||||
| UDT110-10 | 1.0 | 20.30 | ||||
| UDT110-12.5 | 1.25 | 15.20 | ||||
| UDT132-7 | 132 | 0.7 | 29.50 | DN80 | 4200 4000 |
3050x1850x2120(A) 2850x1850x2120(W) |
| UDT132-8 | 0.8 | 27.00 | ||||
| UDT132-10 | 1.0 | 23.00 | ||||
| UDT160-7 | 160 | 0.7 | 34.00 | DN80 | 4400 4200 |
3050x1850x2120(A) 2850x1850x2120(W) |
| UDT160-8 | 0.8 | 33.00 | ||||
| UDT160-10 | 1.0 | 27.00 | ||||
| UDT185-7 | 185 | 0.7 | 39.00 | DN100 | 5600 5300 |
3600x1850x2150(A) 3050x1850x2150(W) |
| UDT185-8 | 0.8 | 38.00 | ||||
| UDT185-10 | 1.0 | 32.50 | ||||
| UDT200-7 | 200 | 0.7 | 43.50 | DN125 | 7350 6800 |
4200x2150x2250(A) 3400x2150x2250(W) |
| UDT200-8 | 0.8 | 41.00 | ||||
| UDT220-7 | 220 | 0.7 | 50.00 | DN125 | 7450 6900 |
4200x2150x2250(A) 3400x2150x2250(W) |
| UDT220-8 | 0.8 | 46.00 | ||||
| UDT220-10 | 1.0 | 41.00 | ||||
| UDT250-7 | 250 | 0.7 | 53.00 | DN125 | 7550 7000 |
4200x2150x2250(A) 3400x2150x2250(W) |
| UDT250-8 | 0.8 | 50.00 | ||||
| UDT250-10 | 1.0 | 46.00 | ||||
| UDT280-7 | 280 | 0.7 | 59 | DN125 | 8550 8200 |
4200x2150x2250(A) 3400x2150x2250(W) |
| UDT280-8 | 0.8 | 56 | ||||
| UDT280-10 | 1.0 | 50 | ||||
| UDT315-7 | 315 | 0.7 | 65 | DN125 | 10000 9120 |
5000x2150x2300(A) 3850x2150x2300(W) |
| UDT315-8 | 0.8 | 61 | ||||
| UDT315-10 | 1.0 | 53 | ||||
| UDT355-7 | 355 | 0.7 | 69.5 | DN125 | 11200 9200 11825 15710 |
5000x2150x2300(A) 3850x2150x2300(W) 6000x2150x2450(A) 4650x2150x2450(W) |
| UDT355-8 | 0.8 | 69.5 | ||||
| UDT355-10 | 1.0 | 61 | ||||
| UDT355-7 | 0.7 | 78 | DN150 | |||
| UDT355-8 | 0.8 | 76.5 | ||||
| UDT355-10 | 1.0 | 67.5 | ||||
| UDT400-7 | 400 | 0.7 | 85 | DN150 | 11985 1571 |
6000x2150x2450(A) 4650x2150x2450(W) |
| UDT400-8 | 0.8 | 84 | ||||
| UDT400-10 | 1.0 | 77 | ||||
| UDT450-7 | 450 | 0.7 | 94.5 | DN150 | 12015 10440 |
6000x2150x2450(A) 4650x2150x2450(W) |
| UDT450-8 | 0.8 | 93 | ||||
| UDT450-10 | 1.0 | 84 | ||||
| UDT500-7 | 500 | 0.7 | 104 | DN150 | 12045 1571 |
6000x2150x2450(A) 4650x2150x2450(W) |
| UDT500-8 | 0.8 | 103 | ||||
| UDT500-10 | 1.0 | 93 | ||||
| UDT560-10 | 560 | 1.0 | 103 | DN150 | 12095 10520 |
6000x2150x2450(A) 4650x2150x2450(W) |
FAQ
Q: How about our after-sales service?
A: Emails or calls for feedbacks in 2 months interval.
Q:What trade terms do we provide?
A: Trade term :CIF ,CFR ,FOB,Ex-Works .
Q: What kind of settlement currency do we offer?
A: We do any kind of currency such as US dollar, euro, RMB, etc.
Q: How long is the delivery time of our product?
A: Our standard delivery time is 30 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.
Q: How to install our compressor?
A: Installation guidance and on-site commissioning provided by trained technicians or local authorised service crew.
Q: What’s the Min. Order requirement ?
A: Our Min. Order quantity is 1pc.
| After-sales Service: | Standard Warranty |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | None |
| Customization: |
Available
|
|
|---|
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by CX 2023-04-19
China DENAIR 200-2000CFM Inverter VSD Rotary Screw Air Compressor with Best Sales
Item Description
.5-80 M3/Min 6-40 Bar 5.5-400 Kw Electrical Stationary Industrial AC Electrical power Direct Driven/Coupled Rotary Screw Air Compressors Advantages
one.DENAIR Enhanced power saving screw air compressor arrived at the super energy preserving level
two.Energy Efficient Index 1(EEI 1) accepted in accordance to GB19153-2009, the energy intake is 10%~fifteen% decrease than EEI 2.
3.CZPT air compressor layout with 72 sorts of technologies patent, true even bigger air flow
four.Condition-of-the-artwork screw aspect, first Germany CZPT air conclude, ladvanced SAP profile style, exceptional Sweden CZPT component bearings
five.CZPT air compressdor dopts world-renowned factors, this sort of as Schneider electronics from France, DENAIR filters from Germany, Danfoss strain sensor from Denmark, etc. add to assure the compressor for a longer time provider life.
six.Smart touch screen design and 0 pressure fall design and style
7.Greater effectiveness cooling program and electrical motor
eight.Stainless steel pipes, realistic inner layout, ensure long service life without servicing.
Technological Parameters Of Power Saving Rotary Screw Air Compressor
| Model | Maxinmum doing work | Capacity(Fad)* | Installed motor | driving manner& Cooling technique |
Noise degree** | Dimensions(mm) | Weight | Air outlet pipe diameter |
|||||||
| pressure | 50 HZ | 60 HZ | power | ||||||||||||
| bar(e) | psig | m3/min | cfm | m3/min | cfm | kw | hp | dB(A) | L | W | H | kg | |||
| DA-55+ | 7.five | 109 | twelve.28 | 434 | 12.five | 441 | fifty five | seventy five | Direct Pushed Air Cooling W-Water Cooling |
69 | 2350 | 1500 | 1600 | 2300 | DN50 |
| eight.5 | 123 | 12.22 | 431 | 12.forty six | 440 | fifty five | 75 | ||||||||
| ten.5 | 152 | nine.twenty five | 327 | twelve.35 | 436 | fifty five | 75 | ||||||||
| 13 | 189 | eight.23 | 291 | seven.61 | 269 | fifty five | seventy five | ||||||||
| DA-75+ | seven.5 | 109 | 16.25 | 574 | 15.02 | 530 | seventy five | a hundred | 69 | 2350 | 1500 | 1600 | 2350 | DN50 | |
| eight.five | 123 | 16.17 | 571 | 14.94 | 528 | 75 | 100 | ||||||||
| ten.five | 152 | 15 | 530 | twelve.35 | 436 | 75 | a hundred | ||||||||
| thirteen | 189 | eleven.82 | 417 | ten.fifteen | 359 | seventy five | one hundred | ||||||||
| DA-90(W)+ | seven.five | 109 | twenty.07 | 709 | 20.seventeen | 712 | 90 | 120 | 72 | 2650 | 1700 | 1850 | 2500 | DN80 | |
| eight.5 | 123 | twenty | 706 | 19.seventy eight | 698 | ninety | 120 | ||||||||
| ten.5 | 152 | fifteen.66 | 553 | 18.nine | 667 | 90 | a hundred and twenty | ||||||||
| 13 | 189 | 14.77 | 522 | 16.32 | 576 | 90 | a hundred and twenty | ||||||||
| DA-one hundred ten(W)+ | seven.five | 109 | 23.4 | 826 | 23.31 | 823 | a hundred and ten | a hundred and fifty | 75 | 2650 | 1700 | 1850 | 3200 | DN80 | |
| 8.five | 123 | 23.19 | 819 | 23 | 812 | 110 | a hundred and fifty | ||||||||
| ten.5 | 152 | eighteen.22 | 643 | 20.16 | 712 | 110 | one hundred fifty | ||||||||
| 13 | 189 | 15.forty two | 544 | 16.sixty three | 587 | 110 | one hundred fifty | ||||||||
| DA-132(W)+ | 7.five | 109 | 27.26 | 963 | 27.seventy two | 979 | 132 | one hundred seventy five | 75 | 2650 | 1700 | 1850 | 3950 | DN80 | |
| 8.5 | 123 | 26.34 | 930 | 27.04 | 955 | 132 | one hundred seventy five | ||||||||
| ten.five | 152 | 21.ninety two | 774 | 23.06 | 814 | 132 | 175 | ||||||||
| 13 | 189 | 19.18 | 677 | 22.sixty eight | 801 | 132 | one hundred seventy five | ||||||||
| DA-160(W)+ | seven.five | 109 | 33.3 | 1176 | 32.99 | 1165 | a hundred and sixty | 215 | 75 | 3000 | 1950 | 2030 | 5000 | DN100 | |
| eight.5 | 123 | 33 | 1165 | 32.34 | 1142 | one hundred sixty | 215 | ||||||||
| ten.five | 152 | 28.seventy four | 1015 | 27.seventy two | 979 | 160 | 215 | ||||||||
| 13 | 189 | 24.sixty two | 869 | 24.09 | 851 | one hundred sixty | 215 | ||||||||
| DA-185(W)+ | seven.five | 109 | 37.six | 1328 | 41.05 | 1450 | 185 | 250 | 75 | 3000 | 1950 | 2030 | 5500 | DN100 | |
| eight.five | 123 | 37.12 | 1311 | 40.ninety six | 1446 | 185 | 250 | ||||||||
| ten.five | 152 | 32.65 | 1153 | 33.1 | 1169 | 185 | 250 | ||||||||
| thirteen | 189 | 28.22 | 996 | 27.19 | 960 | 185 | 250 | ||||||||
| DA-two hundred(W)+ | seven.5 | 109 | forty two.33 | 1495 | 43.26 | 1528 | 200 | 270 | 78 | 3500 | 2200 | 2300 | 6000 | DN125 | |
| 8.5 | 123 | 42.23 | 1491 | forty two.33 | 1495 | 200 | 270 | ||||||||
| ten.five | 152 | 36.97 | 1305 | 33.74 | 1191 | 200 | 270 | ||||||||
| thirteen | 189 | 32.03 | 1131 | 28.31 | 1000 | 200 | 270 | ||||||||
| DA-220(W)+ | seven.five | 109 | 46.fifty six | 1644 | fifty two.05 | 1838 | 220 | three hundred | 78 | 3500 | 2200 | 2300 | 6300 | DN125 | |
| 8.5 | 123 | 46.45 | 1640 | 51.ninety five | 1834 | 220 | three hundred | ||||||||
| 10.five | 152 | forty one.ninety two | 1480 | 43.53 | 1431 | 220 | three hundred | ||||||||
| 13 | 189 | 36.35 | 1284 | 33.4 | 1179 | 220 | three hundred | ||||||||
| DA-250(W)+ | 7.five | 109 | 52.32 | 1847 | fifty seven.35 | 2571 | 250 | 350 | 78 | 3500 | 2200 | 2300 | 6500 | DN125 | |
| 8.five | 123 | fifty two.22 | 1844 | 56.01 | 1978 | 250 | 350 | ||||||||
| 10.five | 152 | 46.14 | 1629 | forty six.seventy eight | 1652 | 250 | 350 | ||||||||
| 13 | 189 | forty one.2 | 1455 | 40.thirteen | 1417 | 250 | 350 | ||||||||
| DA-280(W)+ | 7.5 | 109 | fifty seven.37 | 2026 | sixty one.fifty seven | 2174 | 280 | 375 | 78 | 3700 | 2400 | 2550 | 7000 | DN125 | |
| 8.five | 123 | fifty seven.27 | 2571 | 60.39 | 2131 | 280 | 375 | ||||||||
| 10.five | 152 | fifty.77 | 1793 | fifty one.fifty two | 1819 | 280 | 375 | ||||||||
| 13 | 189 | 45.32 | 1600 | forty six.31 | 1635 | 280 | 375 | ||||||||
| DA-315(W)+ | 7.5 | 109 | 62.ninety three | 2222 | sixty seven.86 | 2396 | 315 | 425 | 80 | 4500 | 2500 | 2450 | 7500 | DN125 | |
| 8.5 | 123 | 62.eighty three | 2219 | 66.57 | 2351 | 315 | 425 | ||||||||
| ten.5 | 152 | 55.fifty one | 1960 | fifty seven.19 | 2019 | 315 | 425 | ||||||||
| 13 | 189 | 49.eighty five | 1760 | 49.91 | 1762 | 315 | 425 | ||||||||
| DA-355(W)+ | 7.five | 102 | seventy three.63 | 2600 | 75.sixty four | 2671 | 355 | 475 | 85 | 4500 | 2500 | 2450 | 8000 | DN125 | |
| 8.five | 123 | 73.forty seven | 2594 | 74.05 | 2615 | 355 | 475 | ||||||||
| 10.five | 152 | sixty three.forty four | 2240 | 67.eighteen | 2372 | 355 | 475 | ||||||||
| 13 | 189 | fifty one.43 | 1816 | fifty.89 | 1797 | 355 | 475 | ||||||||
*) Fad in accordance with ISO 1217 : 2009, Annex C: Absolute ingestion force 1 bar (a), cooling and air ingestion temperature twenty °C
**) Sound amount as per ISO 2151 and the fundamental normal ISO 9614-2, procedure at maximum functioning stress and maximum speed tolerance: ± 3 dB(A)
***) EEI 1- Energy Effiency Index 1, which refers to improved strength preserving series
Specifications are matter to change with out discover.
DENAIR Factory & Product Lines
DENAIR Exhibition
We carefully selected for you the classic scenario
Improved Energy Saving Air Compressor in Oman
Project Name: Sandblasting in Muscat, Oman.
Product Name: 75KW 100HP Increased Power Saving screw air compressor EEI 1 (Strength Performance Index 1) with air dryer, air receiver tank and air filters.
Model No. & Qty: DA-seventy five+ x 1.
Operating Time: From June, 2016 until now
Function: In June, 2015, 1 set of CZPT increased energy saving air compressor method was installed in Muscat Oman. This is the first venture concluded by CZPT distributor in Oman. Our partner Mr. Hari shared the photos at operating web site to us as a good commencing. That implies a lot more and much more CZPT vitality saving remedies will contribute to the industries in Oman in the close to long term. CZPT air compressor factory and air compressor distributor will try the greatest to give top top quality items, value efficient resolution and exceptional service for regional customers in Oman. In purchase to make certain the most specialist provider, the distributor plans to send 2 service engineers to CZPT factory in ZheJiang for instruction and learnin. We will update the information at that time.
FAQ
Q1: Are you manufacturing facility or trade company?
A1: We are factory.
Q2: What the precisely deal with of your manufacturing unit?
A2:No. 366, YangzhuangBang Road, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China
.
Q3: Warranty terms of your air compressor machine?
A3: Two years guarantee for the device and technological assistance in accordance to your wants.
This fall: Will you offer some spare areas of the air compressor?
A4: Of course, of program.
Q5: How lengthy will you get to prepare production?
A5: 380V 50HZ we can delivery the products within 10 days. Other electric power or other color we will shipping and delivery in 22 times
Q6: Can you settle for OEM orders?
A6: Of course, with expert layout crew, OEM orders are very welcome.
|
/ Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
###
| Customization: |
|---|
###
| Model | Maxinmum working | Capacity(FAD)* | Installed motor | driving mode& Cooling method |
Noise level** | Dimensions(mm) | Weight | Air outlet pipe diameter |
|||||||
| pressure | 50 HZ | 60 HZ | power | ||||||||||||
| bar(e) | psig | m3/min | cfm | m3/min | cfm | kw | hp | dB(A) | L | W | H | kg | |||
| DA-55+ | 7.5 | 109 | 12.28 | 434 | 12.5 | 441 | 55 | 75 | Direct Driven Air Cooling W-Water Cooling |
69 | 2350 | 1500 | 1600 | 2300 | DN50 |
| 8.5 | 123 | 12.22 | 431 | 12.46 | 440 | 55 | 75 | ||||||||
| 10.5 | 152 | 9.25 | 327 | 12.35 | 436 | 55 | 75 | ||||||||
| 13 | 189 | 8.23 | 291 | 7.61 | 269 | 55 | 75 | ||||||||
| DA-75+ | 7.5 | 109 | 16.25 | 574 | 15.02 | 530 | 75 | 100 | 69 | 2350 | 1500 | 1600 | 2350 | DN50 | |
| 8.5 | 123 | 16.17 | 571 | 14.94 | 528 | 75 | 100 | ||||||||
| 10.5 | 152 | 15 | 530 | 12.35 | 436 | 75 | 100 | ||||||||
| 13 | 189 | 11.82 | 417 | 10.15 | 359 | 75 | 100 | ||||||||
| DA-90(W)+ | 7.5 | 109 | 20.07 | 709 | 20.17 | 712 | 90 | 120 | 72 | 2650 | 1700 | 1850 | 2500 | DN80 | |
| 8.5 | 123 | 20 | 706 | 19.78 | 698 | 90 | 120 | ||||||||
| 10.5 | 152 | 15.66 | 553 | 18.9 | 667 | 90 | 120 | ||||||||
| 13 | 189 | 14.77 | 522 | 16.32 | 576 | 90 | 120 | ||||||||
| DA-110(W)+ | 7.5 | 109 | 23.4 | 826 | 23.31 | 823 | 110 | 150 | 75 | 2650 | 1700 | 1850 | 3200 | DN80 | |
| 8.5 | 123 | 23.19 | 819 | 23 | 812 | 110 | 150 | ||||||||
| 10.5 | 152 | 18.22 | 643 | 20.16 | 712 | 110 | 150 | ||||||||
| 13 | 189 | 15.42 | 544 | 16.63 | 587 | 110 | 150 | ||||||||
| DA-132(W)+ | 7.5 | 109 | 27.26 | 963 | 27.72 | 979 | 132 | 175 | 75 | 2650 | 1700 | 1850 | 3950 | DN80 | |
| 8.5 | 123 | 26.34 | 930 | 27.04 | 955 | 132 | 175 | ||||||||
| 10.5 | 152 | 21.92 | 774 | 23.06 | 814 | 132 | 175 | ||||||||
| 13 | 189 | 19.18 | 677 | 22.68 | 801 | 132 | 175 | ||||||||
| DA-160(W)+ | 7.5 | 109 | 33.3 | 1176 | 32.99 | 1165 | 160 | 215 | 75 | 3000 | 1950 | 2030 | 5000 | DN100 | |
| 8.5 | 123 | 33 | 1165 | 32.34 | 1142 | 160 | 215 | ||||||||
| 10.5 | 152 | 28.74 | 1015 | 27.72 | 979 | 160 | 215 | ||||||||
| 13 | 189 | 24.62 | 869 | 24.09 | 851 | 160 | 215 | ||||||||
| DA-185(W)+ | 7.5 | 109 | 37.6 | 1328 | 41.05 | 1450 | 185 | 250 | 75 | 3000 | 1950 | 2030 | 5500 | DN100 | |
| 8.5 | 123 | 37.12 | 1311 | 40.96 | 1446 | 185 | 250 | ||||||||
| 10.5 | 152 | 32.65 | 1153 | 33.1 | 1169 | 185 | 250 | ||||||||
| 13 | 189 | 28.22 | 996 | 27.19 | 960 | 185 | 250 | ||||||||
| DA-200(W)+ | 7.5 | 109 | 42.33 | 1495 | 43.26 | 1528 | 200 | 270 | 78 | 3500 | 2200 | 2300 | 6000 | DN125 | |
| 8.5 | 123 | 42.23 | 1491 | 42.33 | 1495 | 200 | 270 | ||||||||
| 10.5 | 152 | 36.97 | 1305 | 33.74 | 1191 | 200 | 270 | ||||||||
| 13 | 189 | 32.03 | 1131 | 28.31 | 1000 | 200 | 270 | ||||||||
| DA-220(W)+ | 7.5 | 109 | 46.56 | 1644 | 52.05 | 1838 | 220 | 300 | 78 | 3500 | 2200 | 2300 | 6300 | DN125 | |
| 8.5 | 123 | 46.45 | 1640 | 51.95 | 1834 | 220 | 300 | ||||||||
| 10.5 | 152 | 41.92 | 1480 | 43.53 | 1431 | 220 | 300 | ||||||||
| 13 | 189 | 36.35 | 1284 | 33.4 | 1179 | 220 | 300 | ||||||||
| DA-250(W)+ | 7.5 | 109 | 52.32 | 1847 | 57.35 | 2025 | 250 | 350 | 78 | 3500 | 2200 | 2300 | 6500 | DN125 | |
| 8.5 | 123 | 52.22 | 1844 | 56.01 | 1978 | 250 | 350 | ||||||||
| 10.5 | 152 | 46.14 | 1629 | 46.78 | 1652 | 250 | 350 | ||||||||
| 13 | 189 | 41.2 | 1455 | 40.13 | 1417 | 250 | 350 | ||||||||
| DA-280(W)+ | 7.5 | 109 | 57.37 | 2026 | 61.57 | 2174 | 280 | 375 | 78 | 3700 | 2400 | 2550 | 7000 | DN125 | |
| 8.5 | 123 | 57.27 | 2022 | 60.39 | 2131 | 280 | 375 | ||||||||
| 10.5 | 152 | 50.77 | 1793 | 51.52 | 1819 | 280 | 375 | ||||||||
| 13 | 189 | 45.32 | 1600 | 46.31 | 1635 | 280 | 375 | ||||||||
| DA-315(W)+ | 7.5 | 109 | 62.93 | 2222 | 67.86 | 2396 | 315 | 425 | 80 | 4500 | 2500 | 2450 | 7500 | DN125 | |
| 8.5 | 123 | 62.83 | 2219 | 66.57 | 2351 | 315 | 425 | ||||||||
| 10.5 | 152 | 55.51 | 1960 | 57.19 | 2019 | 315 | 425 | ||||||||
| 13 | 189 | 49.85 | 1760 | 49.91 | 1762 | 315 | 425 | ||||||||
| DA-355(W)+ | 7.5 | 102 | 73.63 | 2600 | 75.64 | 2671 | 355 | 475 | 85 | 4500 | 2500 | 2450 | 8000 | DN125 | |
| 8.5 | 123 | 73.47 | 2594 | 74.05 | 2615 | 355 | 475 | ||||||||
| 10.5 | 152 | 63.44 | 2240 | 67.18 | 2372 | 355 | 475 | ||||||||
| 13 | 189 | 51.43 | 1816 | 50.89 | 1797 | 355 | 475 | ||||||||
|
/ Piece | |
1 Piece (Min. Order) |
###
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
###
| Customization: |
|---|
###
| Model | Maxinmum working | Capacity(FAD)* | Installed motor | driving mode& Cooling method |
Noise level** | Dimensions(mm) | Weight | Air outlet pipe diameter |
|||||||
| pressure | 50 HZ | 60 HZ | power | ||||||||||||
| bar(e) | psig | m3/min | cfm | m3/min | cfm | kw | hp | dB(A) | L | W | H | kg | |||
| DA-55+ | 7.5 | 109 | 12.28 | 434 | 12.5 | 441 | 55 | 75 | Direct Driven Air Cooling W-Water Cooling |
69 | 2350 | 1500 | 1600 | 2300 | DN50 |
| 8.5 | 123 | 12.22 | 431 | 12.46 | 440 | 55 | 75 | ||||||||
| 10.5 | 152 | 9.25 | 327 | 12.35 | 436 | 55 | 75 | ||||||||
| 13 | 189 | 8.23 | 291 | 7.61 | 269 | 55 | 75 | ||||||||
| DA-75+ | 7.5 | 109 | 16.25 | 574 | 15.02 | 530 | 75 | 100 | 69 | 2350 | 1500 | 1600 | 2350 | DN50 | |
| 8.5 | 123 | 16.17 | 571 | 14.94 | 528 | 75 | 100 | ||||||||
| 10.5 | 152 | 15 | 530 | 12.35 | 436 | 75 | 100 | ||||||||
| 13 | 189 | 11.82 | 417 | 10.15 | 359 | 75 | 100 | ||||||||
| DA-90(W)+ | 7.5 | 109 | 20.07 | 709 | 20.17 | 712 | 90 | 120 | 72 | 2650 | 1700 | 1850 | 2500 | DN80 | |
| 8.5 | 123 | 20 | 706 | 19.78 | 698 | 90 | 120 | ||||||||
| 10.5 | 152 | 15.66 | 553 | 18.9 | 667 | 90 | 120 | ||||||||
| 13 | 189 | 14.77 | 522 | 16.32 | 576 | 90 | 120 | ||||||||
| DA-110(W)+ | 7.5 | 109 | 23.4 | 826 | 23.31 | 823 | 110 | 150 | 75 | 2650 | 1700 | 1850 | 3200 | DN80 | |
| 8.5 | 123 | 23.19 | 819 | 23 | 812 | 110 | 150 | ||||||||
| 10.5 | 152 | 18.22 | 643 | 20.16 | 712 | 110 | 150 | ||||||||
| 13 | 189 | 15.42 | 544 | 16.63 | 587 | 110 | 150 | ||||||||
| DA-132(W)+ | 7.5 | 109 | 27.26 | 963 | 27.72 | 979 | 132 | 175 | 75 | 2650 | 1700 | 1850 | 3950 | DN80 | |
| 8.5 | 123 | 26.34 | 930 | 27.04 | 955 | 132 | 175 | ||||||||
| 10.5 | 152 | 21.92 | 774 | 23.06 | 814 | 132 | 175 | ||||||||
| 13 | 189 | 19.18 | 677 | 22.68 | 801 | 132 | 175 | ||||||||
| DA-160(W)+ | 7.5 | 109 | 33.3 | 1176 | 32.99 | 1165 | 160 | 215 | 75 | 3000 | 1950 | 2030 | 5000 | DN100 | |
| 8.5 | 123 | 33 | 1165 | 32.34 | 1142 | 160 | 215 | ||||||||
| 10.5 | 152 | 28.74 | 1015 | 27.72 | 979 | 160 | 215 | ||||||||
| 13 | 189 | 24.62 | 869 | 24.09 | 851 | 160 | 215 | ||||||||
| DA-185(W)+ | 7.5 | 109 | 37.6 | 1328 | 41.05 | 1450 | 185 | 250 | 75 | 3000 | 1950 | 2030 | 5500 | DN100 | |
| 8.5 | 123 | 37.12 | 1311 | 40.96 | 1446 | 185 | 250 | ||||||||
| 10.5 | 152 | 32.65 | 1153 | 33.1 | 1169 | 185 | 250 | ||||||||
| 13 | 189 | 28.22 | 996 | 27.19 | 960 | 185 | 250 | ||||||||
| DA-200(W)+ | 7.5 | 109 | 42.33 | 1495 | 43.26 | 1528 | 200 | 270 | 78 | 3500 | 2200 | 2300 | 6000 | DN125 | |
| 8.5 | 123 | 42.23 | 1491 | 42.33 | 1495 | 200 | 270 | ||||||||
| 10.5 | 152 | 36.97 | 1305 | 33.74 | 1191 | 200 | 270 | ||||||||
| 13 | 189 | 32.03 | 1131 | 28.31 | 1000 | 200 | 270 | ||||||||
| DA-220(W)+ | 7.5 | 109 | 46.56 | 1644 | 52.05 | 1838 | 220 | 300 | 78 | 3500 | 2200 | 2300 | 6300 | DN125 | |
| 8.5 | 123 | 46.45 | 1640 | 51.95 | 1834 | 220 | 300 | ||||||||
| 10.5 | 152 | 41.92 | 1480 | 43.53 | 1431 | 220 | 300 | ||||||||
| 13 | 189 | 36.35 | 1284 | 33.4 | 1179 | 220 | 300 | ||||||||
| DA-250(W)+ | 7.5 | 109 | 52.32 | 1847 | 57.35 | 2025 | 250 | 350 | 78 | 3500 | 2200 | 2300 | 6500 | DN125 | |
| 8.5 | 123 | 52.22 | 1844 | 56.01 | 1978 | 250 | 350 | ||||||||
| 10.5 | 152 | 46.14 | 1629 | 46.78 | 1652 | 250 | 350 | ||||||||
| 13 | 189 | 41.2 | 1455 | 40.13 | 1417 | 250 | 350 | ||||||||
| DA-280(W)+ | 7.5 | 109 | 57.37 | 2026 | 61.57 | 2174 | 280 | 375 | 78 | 3700 | 2400 | 2550 | 7000 | DN125 | |
| 8.5 | 123 | 57.27 | 2022 | 60.39 | 2131 | 280 | 375 | ||||||||
| 10.5 | 152 | 50.77 | 1793 | 51.52 | 1819 | 280 | 375 | ||||||||
| 13 | 189 | 45.32 | 1600 | 46.31 | 1635 | 280 | 375 | ||||||||
| DA-315(W)+ | 7.5 | 109 | 62.93 | 2222 | 67.86 | 2396 | 315 | 425 | 80 | 4500 | 2500 | 2450 | 7500 | DN125 | |
| 8.5 | 123 | 62.83 | 2219 | 66.57 | 2351 | 315 | 425 | ||||||||
| 10.5 | 152 | 55.51 | 1960 | 57.19 | 2019 | 315 | 425 | ||||||||
| 13 | 189 | 49.85 | 1760 | 49.91 | 1762 | 315 | 425 | ||||||||
| DA-355(W)+ | 7.5 | 102 | 73.63 | 2600 | 75.64 | 2671 | 355 | 475 | 85 | 4500 | 2500 | 2450 | 8000 | DN125 | |
| 8.5 | 123 | 73.47 | 2594 | 74.05 | 2615 | 355 | 475 | ||||||||
| 10.5 | 152 | 63.44 | 2240 | 67.18 | 2372 | 355 | 475 | ||||||||
| 13 | 189 | 51.43 | 1816 | 50.89 | 1797 | 355 | 475 | ||||||||
A Buyer’s Guide to Air Compressor Types
There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
Single-stage air compressors
A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.
Rotary vane compressors
Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
Rotary vane compressors with low-noise models
If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
Rotary vane compressors with two pistons
The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.
editor by CX 2023-03-31
China Mitsubishi R134A Mini Rotary Compressor Kb122ypd for Precision Cabinet Air Condition air compressor parts
Product Description
Mitsubishi R134a Mini Rotary Compressor KB122YPD for Precision Cupboard Air Issue
Specialized Specification
Complex Specification for other Collection
A lot more Power range for picking a piston refrigeration compressor
| Model | CB150 | CB32 | CB40 | CB50 | CB64 | CB80 | CB90 | CB100 | CB125 | ||
| Nominal electricity | KW | 10.eight | one.8 | 2.5 | 3.seventy five | three.75 | 5.five | 6.5 | 7.5 | nine.8 | |
| Refrigerating potential | 50HZ | Kcal/H | 38000 | 6700 | 9100 | 12600 | 14600 | 18500 | 21600 | 25600 | 32700 |
| BTU/H | 150800 | 26600 | 36100 | 50000 | 57900 | 73400 | 85700 | 101600 | 129800 | ||
| 60HZ | Kcal/H | 44700 | 8000 | 11200 | 15000 | 17700 | 21800 | 25800 | 35710 | 38400 | |
| BTU/H | 177400 | 31700 | 44400 | 59520 | 75710 | 86500 | 99600 | 119400 | 152400 | ||
| Input electricity | W | 50HZ | 14200 | 2520 | 3440 | 4640 | 5530 | 6570 | 7900 | 9320 | 12000 |
| 60HZ | 18000 | 3120 | 4280 | 5760 | 7571 | 8030 | 9800 | 11350 | 15200 | ||
| Work current | A | 50HZ | 47 | eight.6 | twelve.seven | 17 | 19.three | 21.eight | twenty five.one | 31.four | 38.5 |
| 60HZ | fifty four | nine.eight | thirteen.5 | 17.eight | 21.8 | 24 | 29.six | 35.1 | 45.6 | ||
| Discharge price | cc | 286.four | 58.eight | 77.9 | 101.2 | 117.4 | 151.7 | 178.9 | 202 | 249.9 | |
| cu. In | seventeen.48 | three.59 | four.75 | six.18 | seven.sixteen | 9.26 | ten.92 | 12.33 | 15.twenty five | ||
| EER | 50HZ | Kcal/H | 2.68 | two.sixty six | 2.65 | two.seventy four | 2.sixty four | 2.eighty two | two.73 | 2.75 | two.seventy three |
| BTU/H | 10.six | 10.6 | 10.5 | 10.9 | 10.5 | eleven.2 | 10.eight | ten.nine | ten.8 | ||
| 60HZ | Kcal/H | 2.forty nine | 2.56 | 2.62 | 2.sixty three | 2.fifty two | two.seventy one | two.fifty six | two.65 | two.53 | |
| BTU/H | nine.9 | ten.two | ten.4 | 10.4 | 10 | 10.eight | 10.two | 10.five | 10 | ||
| Noise | dB(A) | 50HZ | 73 | sixty seven | sixty nine | seventy two | 71 | 75 | 76 | 78 | 80 |
| 60HZ | seventy three | 69 | 72 | 72 | 73 | 76 | 78 | 78 | 80 | ||
| Fat | kg | seventy three.one | 38 | 40 | 43 | forty three | 63.6 | 63.six | sixty six.1 | 69.one | |
| Insulation grade | E | E | E | E | E | E | E | E | E | ||
| Starting present | A | 50HZ | 330 | 76 | 112 | 157 | 157 | 200 | 200 | 225 | 292 |
| 60HZ | 290 | seventy one | 102 | 148 | 148 | one hundred eighty | a hundred and eighty | 195 | 265 | ||
| Admission pipe dia. | mm | 28 | 15.88 | 15.88 | 22 | 22 | 28 | 28 | 28 | 28 | |
| inch | one | 5/eight | 5/eight | 7/eight | 7/eight | 1 | one | one | 1 | ||
| Vent-pipe dia. | mm | 19.05 | nine.52 | nine.fifty two | 12.7 | twelve.seven | 19.05 | 19.05 | 19.05 | 19.05 | |
| inch | 3/four | 3/eight | 3/8 | 1/two | 1/two | 3/four | 3/four | 3/4 | 3/4 | ||
Refrigeration Compressors Scope
We are specialised in refrigeration compressors, including rotary, scroll, piston, screw, airtight, semi-airtight all types of brand names of refrigeration compressors.
1. Rotary compressor: Toshiba,Panasonic, CZPT LG
2. Scroll compressor: Copeland,Dan-foss performer,Hitachi,Daikin,Sanyo
three.Piston airtight compressor:Tecumseh CZPT MT,NTZ,MTZ series.
4.Semi-hermetic Reciprocating Compressor:Copeland,Bit-zer,Provider
5.Screw compressor :Little bit-zer ,Hitachi
Mitsubishi R134a Mini Rotary Compressor KB122YPD for Precision Cupboard Air Situation
Brand Variety
Mitsubishi R134a Mini Rotary Compressor KB122YPD for Precision Cabinet Air Condition
Workshop
FAQ
1. What is the cost for a refrigeration compressor?
The price is made a decision by Quantity.
2. How about samples?
Sample Direct Time: 5 working days
Sample Price:
1). It really is free of charge for all for a standard consumer
2). For new consumers, we will demand first, it is totally refundable when the purchase is confirmed.
3. How a lot of times for shipping and delivery?
Delivery Techniques and Lead Time:
By Express: 3-5 operating days to your doorway (DHL, UPS, TNT, FedEx…)
By Air: 5-8 functioning times to your airport
By Sea: Pls suggest your port of location, the specific times will be verified by our forwarders, and the adhering to guide time is for your reference. Europe and America (25 – 35 times), Asia (3-7 days), Australia ( 16-23 times)
four. What are the Terms of Payment?
Credit rating Card, T/T, L/C, Western Union 30% T/T in progress, 70% ahead of supply.
5. Packaging & Shipping?
Pallet, wood case or with outer carton, or as customers’ specific demands.
6. Why decide on your company?
We are focusing on all factors of refrigeration compressors, substantial top quality, and good costs.
We strictly implement the rules according to the quality standard in every aspect from the purchase of uncooked materials to the manufacturing method and outgoing of goods.
Excellent support and Excellent good quality is offered all the time…
Packaging & Shipping Packing: Carton, picket box, and pallet, or as for every customers’ needs.
Transport: By Categorical (DHL /UPS /TNT /FedEx /EMS), By Air, By Sea
Mitsubishi R134a Mini Rotary Compressor KB122YPD for Precision Cupboard Air Issue
Packaging and shipping and delivery
HVAC&R Exhibition
Mitsubishi R134a Mini Rotary Compressor KB122YPD for Precision Cabinet Air Problem
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 6 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Parallel Arrangement |
| Cylinder Position: | Vertical |
###
| Customization: |
Available
|
|---|
###
| Model | CB150 | CB32 | CB40 | CB50 | CB64 | CB80 | CB90 | CB100 | CB125 | ||
| Nominal power | KW | 10.8 | 1.8 | 2.5 | 3.75 | 3.75 | 5.5 | 6.5 | 7.5 | 9.8 | |
| Refrigerating capacity | 50HZ | Kcal/H | 38000 | 6700 | 9100 | 12600 | 14600 | 18500 | 21600 | 25600 | 32700 |
| BTU/H | 150800 | 26600 | 36100 | 50000 | 57900 | 73400 | 85700 | 101600 | 129800 | ||
| 60HZ | Kcal/H | 44700 | 8000 | 11200 | 15000 | 17700 | 21800 | 25800 | 30100 | 38400 | |
| BTU/H | 177400 | 31700 | 44400 | 59520 | 70200 | 86500 | 99600 | 119400 | 152400 | ||
| Input power | W | 50HZ | 14200 | 2520 | 3440 | 4640 | 5530 | 6570 | 7900 | 9320 | 12000 |
| 60HZ | 18000 | 3120 | 4280 | 5760 | 7020 | 8030 | 9800 | 11350 | 15200 | ||
| Work current | A | 50HZ | 47 | 8.6 | 12.7 | 17 | 19.3 | 21.8 | 25.1 | 31.4 | 38.5 |
| 60HZ | 54 | 9.8 | 13.5 | 17.8 | 21.8 | 24 | 29.6 | 35.1 | 45.6 | ||
| Discharge rate | cc | 286.4 | 58.8 | 77.9 | 101.2 | 117.4 | 151.7 | 178.9 | 202 | 249.9 | |
| cu. In | 17.48 | 3.59 | 4.75 | 6.18 | 7.16 | 9.26 | 10.92 | 12.33 | 15.25 | ||
| EER | 50HZ | Kcal/H | 2.68 | 2.66 | 2.65 | 2.74 | 2.64 | 2.82 | 2.73 | 2.75 | 2.73 |
| BTU/H | 10.6 | 10.6 | 10.5 | 10.9 | 10.5 | 11.2 | 10.8 | 10.9 | 10.8 | ||
| 60HZ | Kcal/H | 2.49 | 2.56 | 2.62 | 2.63 | 2.52 | 2.71 | 2.56 | 2.65 | 2.53 | |
| BTU/H | 9.9 | 10.2 | 10.4 | 10.4 | 10 | 10.8 | 10.2 | 10.5 | 10 | ||
| Noise | dB(A) | 50HZ | 73 | 67 | 69 | 72 | 71 | 75 | 76 | 78 | 80 |
| 60HZ | 73 | 69 | 72 | 72 | 73 | 76 | 78 | 78 | 80 | ||
| Weight | kg | 73.1 | 38 | 40 | 43 | 43 | 63.6 | 63.6 | 66.1 | 69.1 | |
| Insulation grade | E | E | E | E | E | E | E | E | E | ||
| Starting current | A | 50HZ | 330 | 76 | 112 | 157 | 157 | 200 | 200 | 225 | 292 |
| 60HZ | 290 | 71 | 102 | 148 | 148 | 180 | 180 | 195 | 265 | ||
| Admission pipe dia. | mm | 28 | 15.88 | 15.88 | 22 | 22 | 28 | 28 | 28 | 28 | |
| inch | 1 | 5/8 | 5/8 | 7/8 | 7/8 | 1 | 1 | 1 | 1 | ||
| Vent-pipe dia. | mm | 19.05 | 9.52 | 9.52 | 12.7 | 12.7 | 19.05 | 19.05 | 19.05 | 19.05 | |
| inch | 3/4 | 3/8 | 3/8 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 | 3/4 | ||
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 6 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Parallel Arrangement |
| Cylinder Position: | Vertical |
###
| Customization: |
Available
|
|---|
###
| Model | CB150 | CB32 | CB40 | CB50 | CB64 | CB80 | CB90 | CB100 | CB125 | ||
| Nominal power | KW | 10.8 | 1.8 | 2.5 | 3.75 | 3.75 | 5.5 | 6.5 | 7.5 | 9.8 | |
| Refrigerating capacity | 50HZ | Kcal/H | 38000 | 6700 | 9100 | 12600 | 14600 | 18500 | 21600 | 25600 | 32700 |
| BTU/H | 150800 | 26600 | 36100 | 50000 | 57900 | 73400 | 85700 | 101600 | 129800 | ||
| 60HZ | Kcal/H | 44700 | 8000 | 11200 | 15000 | 17700 | 21800 | 25800 | 30100 | 38400 | |
| BTU/H | 177400 | 31700 | 44400 | 59520 | 70200 | 86500 | 99600 | 119400 | 152400 | ||
| Input power | W | 50HZ | 14200 | 2520 | 3440 | 4640 | 5530 | 6570 | 7900 | 9320 | 12000 |
| 60HZ | 18000 | 3120 | 4280 | 5760 | 7020 | 8030 | 9800 | 11350 | 15200 | ||
| Work current | A | 50HZ | 47 | 8.6 | 12.7 | 17 | 19.3 | 21.8 | 25.1 | 31.4 | 38.5 |
| 60HZ | 54 | 9.8 | 13.5 | 17.8 | 21.8 | 24 | 29.6 | 35.1 | 45.6 | ||
| Discharge rate | cc | 286.4 | 58.8 | 77.9 | 101.2 | 117.4 | 151.7 | 178.9 | 202 | 249.9 | |
| cu. In | 17.48 | 3.59 | 4.75 | 6.18 | 7.16 | 9.26 | 10.92 | 12.33 | 15.25 | ||
| EER | 50HZ | Kcal/H | 2.68 | 2.66 | 2.65 | 2.74 | 2.64 | 2.82 | 2.73 | 2.75 | 2.73 |
| BTU/H | 10.6 | 10.6 | 10.5 | 10.9 | 10.5 | 11.2 | 10.8 | 10.9 | 10.8 | ||
| 60HZ | Kcal/H | 2.49 | 2.56 | 2.62 | 2.63 | 2.52 | 2.71 | 2.56 | 2.65 | 2.53 | |
| BTU/H | 9.9 | 10.2 | 10.4 | 10.4 | 10 | 10.8 | 10.2 | 10.5 | 10 | ||
| Noise | dB(A) | 50HZ | 73 | 67 | 69 | 72 | 71 | 75 | 76 | 78 | 80 |
| 60HZ | 73 | 69 | 72 | 72 | 73 | 76 | 78 | 78 | 80 | ||
| Weight | kg | 73.1 | 38 | 40 | 43 | 43 | 63.6 | 63.6 | 66.1 | 69.1 | |
| Insulation grade | E | E | E | E | E | E | E | E | E | ||
| Starting current | A | 50HZ | 330 | 76 | 112 | 157 | 157 | 200 | 200 | 225 | 292 |
| 60HZ | 290 | 71 | 102 | 148 | 148 | 180 | 180 | 195 | 265 | ||
| Admission pipe dia. | mm | 28 | 15.88 | 15.88 | 22 | 22 | 28 | 28 | 28 | 28 | |
| inch | 1 | 5/8 | 5/8 | 7/8 | 7/8 | 1 | 1 | 1 | 1 | ||
| Vent-pipe dia. | mm | 19.05 | 9.52 | 9.52 | 12.7 | 12.7 | 19.05 | 19.05 | 19.05 | 19.05 | |
| inch | 3/4 | 3/8 | 3/8 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 | 3/4 | ||
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by czh 2023-01-30